|Antique Color Wash Information
One 30 pound bucket of Antique Release covers approximately 1000
square feet. The rate may vary slightly, but will be in the range of 3 to 4
pounds per 100 square feet.
Wash is taking the industry by storm. This versatile coloring agent is
easily applied and will hold fast to any textured concrete surface. This
powder is designed to mix with water and be applied as a liquid wash
coat. EZ-Tique can be used to revitalize a weathered concrete surface
or add an antique color to a freshly textured surface. It goes on quickly
and easily and can be removed readily for greater control of the coloring
process. This product is water-based, non-hazardous and zero V.O.C.
EZ-Tique comes in 42 standard colors, as does Proline's Color Newly
introduced by Proline, EZ-Tique Water Based Acrylic Antiquing
Hardener and Antique Release. It comes in a 3 lb. pail and covers about
2,000 - 3,000 square feet per container, making this product extremely
affordable. Color Hardener, Antique Release Agent and Antique Color
Wash are available in 40 standard colors. The color chart is a
representative only and does not guarantee that the final color will be an
exact match. Texturing or finishing techniques such as brooming or
troweling, the use of sealers and slight color drifts in raw materials will
produce variations of the colors. We recommend a representative job
sample for each product.
Sealing And Maintenance:
A quality sealer is recommended to protect the newly textured or
colored concrete surface. The concrete must be cleaned and thoroughly
dried prior to application. Inspect annually for areas of thin or traffic-worn
sealer and reapply as necessary.
KEEP OUT OF REACH OF CHILDREN. Before using or handling, read
the Material Safety Data Sheet and Warranty. Do not take internally.
Avoid contact with skin and eyes. Use only with a NIOSH approved
respirator when using these products.
This product is not intended for public use and is intended for use by
licensed contractors and installers who are experienced and trained in
the use of these products. It is warranted to be of uniform quality, within
manufacturing tolerances. The manufacturer has no control over the use
of this product, therefore no warranty, expressed or implied, is made
either as to the effects or results of such use. Seller and manufacturer
obligations under this warranty shall be limited to refunding the purchase
price of that portion of the material proven to be defective. The user
assumes all risks and liabilities resulting from use of this product.